Oki B4500 Maintenance Manual page 57

LCD
Status level
I I
Warning
FILE IS WRITE PROTECTED
I I
Warning
INVALD ID.JOB REJECTED
I I
Warning
LOG BUFFER FULL.
JOB REJECTED
I I
Warning
FILE OPERATION FAILED nnn
Error MANUAL
mmmm REQUEST
Error tttt
DUPLEX REQUEST
Error LOAD mmm
tttt EMPTY
Error CLOSE COVER
TRAY2 COVER OPEN
Error CHANGE PAPER TO mmmm/
pppp
tttt MEDIA MISMATCH
Error CHANGE PAPER TO mmmm/
pppp
tttt SIZE MISMATCH
Error RS232C
OVERFLOW
Error RS232C
OVER RUN
Error RS232C
PRY ERR
Error RS232C
FRM ERR
Error CONFIG
WRITING
Error NETWORK
INITIAL
Error DL MSG
FAILED n
Error CHANGE CARTRIDGE
TONER EMPTY
43502101TH Rev.1
Table 5-1 (3/5)
LED
Varies An attempt to write in a write-protected file was made.
Because this is a transient warning, it is displayed until the job is
completed. then, cleared.
Varies Notifies a user that the job has been cancelled as permission for printing
has not been received.
This is displayed until the ON LINE key is pressed.
Varies Notifies a user that the job has been cancelled as the log buffer is
full. This is displayed until the ON LINE key is pressed.
Varies There was unauthorized access in the flash memory.
Acquire a log with JOB Accounting system.
Light Manual print request. Prompts the user to set paper indicated by
mmmm manually.
Light Paper feeding is recommended because the print of back sides
(odd number pages) is finished during the Manual Duplex print.
JOB is canceled if a paper isn't put even if it passes through the
time when it is set up with "MAN TIME".
No Light Indicates that a print request was sent to the tttt tray that has
become empty. A message for setting mmmm paper.
TRAY1
TRAY2
MPF
No Light Print request has been made to the 2nd tray route cover open.
To continue, close cover.
No Light The media type in the tray and the edit media type do not match.
TRAY1
TRAY2
MPF
No Light The paper size in the tray and the edit size do not match.
TRAY1
TRAY2
MPF
No Light RS232C Overflow has Occurred.
To continue, press ON-LINE switch.
No Light RS232C Over Run has Occurred.
To continue, press ON-LINE switch.
No Light RS232C Parity Error has Occurred.
To continue, press ON-LINE switch.
No Light RS232C Framing Error has Occurred.
To continue, press ON-LINE switch.
Varies During the network menu renewal.
Varies Initializing (rebooting) a section related to NIC.
Varies Writing the download message data failed.
"n" shows the reason for failure
1:FAIL
2:DATA_ERROR
3:OVERFLOW
4:MEMORYFULL
5:UNSUPPORTED_DATA
No Light Toner Low has passed, and almost no toner is left in the cartridge.
For temporary operation, open/close the cover or press "ON-LINE"
switch, to recover the printer operation. But basically you must
change the toner cartridge.
Oki Data CONFIDENTIAL
Descroption
57 /