2.3.3
Operator Panel Assy
(1) Unlock two latches on the upper cover from the rear side, lift the operator panel assy 1 from the
back and remove it.
(2) Remove the cable 2 from the connector (CN1) 3.
Note :
You can remove the operator panel assy while the upper cover installed on the unit. However,
it is much easier to remove the panel assy after removal of upper cover.
1
43502101TH Rev.1
Rear view
2
Unlock two latches with a tip of
screw driver. For the purpose,
insert a driver through faceup
paper outlet as shown.
3
Oki Data CONFIDENTIAL
22 /