Fiat SEDICI Owner's Handbook Manual page 97

❒ Turn the ignition switch to the "ACC"
or "ON" position while holding in the
"DISP" knob (c). The unit display of fu-
el consumption will blink the current
unit.
❒ Push the "DISP" knob (c) quickly to
change the display as shown in the
above illustrations.
❒ Push the "DISP" knob (c) for more than
2 seconds, and the unit display will stop
blinking and the display will stay on. If
you don't operate the "DISP" knob (c)
within about 8 seconds, the unit display
will automatically stop blinking and the
display will stay on.
96
NOTE
❒ The value of fuel consumption shown
in the display is affected by such as fol-
lowing conditions;
– road condition
– surrounding traffic condition
– driving condition
❒ The information display will be changed
to the state of initialization when you
63J148
reconnect the negative (–) terminal to
a battery.
Type B (For Diesel Engine Model)
This display shows instantaneous fuel con-
sumption when the vehicle is moving.
However, the display of instantaneous fu-
el consumption can be turned off if you
desire.
NOTE Unless the vehicle is moving, the
display will indicate "--.-".
You can change the unit indication be-
tween "l/ 100km" or "MPG" and you can
also turn the display off. To change the in-
dication, follow the instructions below.
62J143