Fiat SEDICI Owner's Handbook Manual page 109

❒ If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
❒ Even under the automatic operation,
you can set some of the blower speed
selector/ air intake selector (2) and air
flow selector (3) into manual mode.
Then the manually selected function is
maintained preferentially, and the oth-
er functions remain under automatic
operation.
❒ To return the air intake selector (2) to
automatic operation when both the
blower speed selector (2) and the air
flow selector (3) are in the "AUTO"
position, turn either the selector (2) or
(3) to a position other than "AUTO",
then turn to the "AUTO" position
again.
108
(F)
Be careful not to cover the interior tem-
perature sensor (F) between the steering
wheel and the climate control panel, or
the solar sensor (G) located at the top of
the driver's side dashboard. These sensors
are used by the automatic system to reg-
ulate temperature.
Manual operation
You can manually control the climate con-
trol system. Set the selectors to your de-
sired position.
(G)
79J071
NOTE If you need maximum defrosting:
❒ set the air flow selector to "DEFROST"
(the air conditioning system will come
on and the "FRESH AIR" mode will be
selected automatically),
❒ set the blower speed selector to HIGH,
❒ adjust the temperature selector to the
HOT end, and
❒ adjust the side outlets so the air blows
on the side windows.
79J070