Fiat SEDICI Owner's Handbook Manual page 75

Hide thumbs Also See for SEDICI:
Table of Contents

Advertisement

"ESP" WARNING LIGHT
(if equipped)
(Electronic Stability Program)
When the ignition switch is turned to the
"ON" position, the light comes on briefly
so you can check that the light is working.
If the light stays on, or comes on when dri-
ving, there may be something wrong with
®
the ESP
systems (other than ABS). You
should have the system inspected by an
authorized FIAT dealer.
For details of the ESP
"Electronic Stability Program (ESP
"OPERATING YOUR VEHICLE" section.
"ESP OFF" INDICATOR LIGHT
(if equipped)
74
When the ignition switch is turned to the
"ON" position, this light comes on briefly
so you can check that the light is working.
When the "ESP OFF" switch is pushed to
turn off the ESP
ABS), the "ESP OFF" light comes on and
stays on.
For details of the ESP
"Electronic Stability Program (ESP
the "OPERATING YOUR VEHICLE" sec-
66J031
tion.
OIL PRESSURE LIGHT
®
systems, refer to
®
)" in the
This light comes on when the ignition
switch is turned to the "ON" position, and
goes out when the engine is started. The
light will come on and remain on if there
is insufficient oil pressure.
travelling stop the engine immedi-
66J032
ately and contact a Fiat Dealership.
®
systems (other than
®
systems, refer to
®
)" in
50G051A
WARNING
If the warning light v
turns on when the vehicle is
Check the oil level and add oil if necessary.
If there is enough oil, the lubrication sys-
tem should be inspected by your Fiat Deal-
ership before you drive the vehicle again.
IMPORTANT
❒ If you operate the engine with this light
on, severe engine damage can result.
❒ Do not rely on the Oil Pressure Light
to indicate the need to add oil. Be
sure to periodically check the engine
oil level.
Oil Life Monitoring
(for Diesel Engine Model)
Your vehicle also has the oil life monitor-
ing system that let you know when to
change the engine oil and filter.
If the oil pressure light blinks, you should
change the engine oil and oil filter imme-
diately since the monitoring system has
calculated that oil life has been diminished
by detecting a deterioration, increase or
decrease of engine oil. The blinking light
goes out after 1 minute and comes back
on every hour. If the life of engine oil re-
mains 0%, the oil pressure light blinks for
1 minute when the engine is started. You
should change the engine oil and filter at
the first blink. For details on how to
change the engine oil, refer to "Changing
Engine Oil and Filter" in "INSPECTION
AND MAINTENANCE" section.
Whenever the engine oil is changed, the
light must be reset to monitor the next oil
change timing properly. To reset the light,
consult your Fiat Dealership.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents