Fiat SEDICI Owner's Handbook Manual page 83

(A)
(3)
(C)
When the ignition switch is turned to
"ON" with the lighting switch is in the
"OFF" position, the display shows three
types of indication; odometer (A), trip
meter A (B) and trip meter B (C). Push
the selector knob (3) quickly to switch the
indication among the three.
82
(B) (A)
(D)
65D603
When the ignition switch is turned to
"ON" and the lighting switch is turned to
the second or third position with the il-
lumination cancel switch in the OFF po-
sition, the display shows four types of in-
dication; odometer (A), tripmeter A (B),
tripmeter B (C) and indication of illumi-
nation intensity (D). Push the selector
knob (3) quickly to switch the indication
among the four. When the indication
shows (D), you can control the meter il-
lumination intensity. Refer to "Meter illu-
mination control" section below for de-
tails on how to dim or brighten the meter
illumination.
For details on how to use the illumination
cancel switch, refer to "Illumination Can-
cel Switch" in this section.
(B)
(3)
(C)
65D532
To reset the trip meter to zero, hold in
the selector knob (3) for about 2 seconds.
(3)
About 2 seconds
65D481