Fiat SEDICI Owner's Handbook Manual page 96

Hide thumbs Also See for SEDICI:
Table of Contents

Advertisement

THERMOMETER (2)
The thermometer shows the outside tem-
perature when the ignition switch is in the
"ON" position.
If the outside temperature nears freezing,
the mark (d) will come on.
NOTE The thermometer will not indicate
the actual outside temperature when dri-
ving at low speed, or when stopped.
FUEL CONSUMPTION (3)
This display can be changed to show in-
stantaneous fuel consumption or average
fuel consumption by changing the display.
Also, the display of fuel consumption can
be turned off if you desire.
When the ignition switch is turned to the
"ACC" or "ON" position:
❒ If you selected instantaneous fuel con-
sumption the last time you drove the
vehicle, the display indicates "--.-".
Unless the vehicle is moving, the display
will indicate "--.-".
❒ If you selected average fuel consump-
tion the last time you drove the vehi-
cle, the display shows the last value of
average fuel consumption. Unless you
reset the value of average fuel con-
sumption, the display will show the val-
ue of average fuel consumption which
includes average fuel consumption dur-
ing previous driving.
For details of how to reset the display,
refer to the explanation in this section.
Type A (For Gasoline Engine Model)
Every time you push the "DISP" knob (c),
the display will be changed among the fol-
lowing three displays.
e. Instantaneous fuel consumption
f. Average fuel consumption
g. No display
To reset the value of average fuel con-
sumption, hold in the "DISP" knob (c) for
more than 2 seconds. The display will in-
dicate "--.-" and then will show the aver-
age fuel consumption again after driving
for a short time.
You can also change the unit display of fu-
el consumption. You should operate the
display before the vehicle moves. To
change the display, follow the instructions
below.
63J202
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents