Fiat SEDICI Owner's Handbook Manual page 222

(2)
(1)
(2)
(1)
OTHER GENERAL LIGHTS
Bulb holder
1. Removal
2. Installation
To remove a bulb holder from a light
housing, turn the holder counterclockwise
and pull it out. To install the holder, push
the holder in and turn it clockwise.
Bulb
3. Removal
4. Installation
There are two types of bulb, "Full glass
type" (1) and "Glass/ metal type" (2).
To remove and install a full glass type bulb
(1), simply pull out or push in the bulb.
(1)
(3)
(4)
54G123
Front parking light (1)
Front turn signal light (2)
(2)
To remove a glass metal type bulb (2)
from a bulb holder, push in the bulb and
turn it counterclockwise. To install a new
bulb, push it in and turn it clockwise.
You can access the individual bulb or bulb
holders as follows.
Front fog light
(2)
54G124
Rear combination light
(tail, stop, turn signal, etc.)
(1)
79J012
Spot light (if equipped)
79J013
79J014
221
79J131