Fiat SEDICI Owner's Handbook Manual page 62

IMPORTANT The remote controller is
a sensitive electronic instrument. To avoid
damaging the remote controller:
❒ Do not expose it to impacts, moisture
or high temperature such as on the
dashboard under direct sunlight.
❒ Keep the remote controller away from
magnetic objects such as a television.
You can also turn the ignition switch by
inserting the ignition key into the slot.
If you leave any of the doors open with the
ignition switch in the "ACC" position for
a while (and no key inserted), the engine
may not start when you turn the ignition
switch to "START". If the engine does not
start, close all doors completely or turn
the ignition switch back to the "LOCK"
position, then start the engine.
The ignition switch has the following four
positions:
LOCK (1)
This is the normal parking position. It is
the only position in which the key can be
removed. It locks the ignition, and pre-
vents normal use of the steering wheel.
To release the steering lock, turn the ig-
nition switch clockwise to one of the oth-
er positions. If you have trouble turning
the ignition switch to unlock the steer-
ing, try turning the steering wheel slightly
to the right or left while turning the
switch.
NOTE You must push the ignition switch
to turn it to the "ACC" position. Also you
must push the ignition switch to return it
to the "LOCK" position.
ACC (2)
Accessories such as the radio can oper-
ate, but the engine is off.
ON (3)
This is the normal operating position. All
electrical systems are on.
START (4)
This is the position for starting the engine
using the starter motor. The switch should
be released from this position as soon as
the engine starts.
61