Fiat SEDICI Owner's Handbook Manual page 115

Hide thumbs Also See for SEDICI:
Table of Contents

Advertisement

Auto Tuning
If the up button (4) or the down button
(5) is released after pressing it for about
1 second or more, the unit searches for
a station till it receives one.
(4): Higher frequency
(5): Lower frequency
NOTE If AF is ON, the unit searches for
RDS stations only.
114
Manual Preset
If any of the preset buttons (7) with num-
bers [1] to [6] is pressed for about 2 sec-
onds or more, the station received cor-
responding to the pressed button is pre-
set.
NOTE
❒ Stations can be preset for FM1, FM2,
LW, MW1, and MW2 respectively.
❒ When stations are preset, the new da-
79J190
ta is written over the old data.
Auto Preset
By pressing auto search button (8) for
about 2 seconds or longer, six stations in
good receiving condition on the band now
selected can be automatically preset.
NOTE
❒ Auto Preset can be released by press-
ing the auto search button (8) while au-
to preset is in process.
❒ Stations can be preset for FM1, FM2,
LW, MW1, and MW2 respectively.
❒ Up to six stations can be preset. If sta-
tions in good receiving condition are
not found, the number of stations pre-
set may be less than six.
❒ After you have preset stations, the sta-
tion preset under the button with num-
ber [1] is received. If none of stations
is found, the unit is reset to the pre-
ceding frequency.
❒ When stations are preset, the new da-
ta is written over the old data.
❒ If AF is ON, only RDS stations are pre-
set.
Preset Station Calling
By pressing any of the preset buttons (7)
with numbers [1] to [6], the correspond-
ing station preset can be received.
NOTE If the button for a station not pre-
set is pressed, the unit displays "- - -".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents