Contact Partner In The Case Of Problems; Troubleshooting; Caring For Your Telephone - Siemens OpenStage 60/60 G Operation Manual

Hipath 4000
Table of Contents

Advertisement

Contact partner in the case of problems

Contact your service personnel if a fault persists for more than five min-
utes, for example.

Troubleshooting

Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone
("Do not disturb" appears on the screen
You cannot dial an external number:
Check whether your telephone is locked ("Phone locked: Enter Password"
appears on the screen). If the phone is locked, unlock it.
To correct any other problems:
First contact the relevant service personnel. If the service personnel are
unable to correct the problem, they must contact Customer Service.

Caring for your telephone

Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use aggressive or alcohol-based cleansers on plastic parts. The
use of scouring agents is also forbidden.
Fixing problems
Page 27). If so, deactivate it.
203

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 80/80 gOpenstage key module

Table of Contents