Table of Contents
Advertisement
Doc. Title
6.3.2 System assembly inspection:
1. Gap between each key and ME parts
2 Gap between all generic ME parts
3 Slider gap between B and C part
4 Stylus ( If necessary)
5 outlook dimension spec
6. Others, refer to production release spec
1. Step between mating parts.
2. Others, refer to production release spec
Description
Class A
HTC CONFIDENTIAL
HTC Corporation
.
Neon Service Manual
Description
Step inspection
Description
Exposure of substrate do not accept
Scratch : L≦4mm ,W≦0.2mm ,N≦2, S≧10mm
Gap inspection
Can't stuck up or no click feeling
It couldn't allow stuck up at pressing process.
Gap between all generic ME parts < 0.4 mm
Slider gap between B and C part ≦ 0.9 mm
Stylus assembly protruding, loose, missing,
falling and deformed is not allowed.
Device thickness: 18.05mm (+0.4mm / -0.1mm)
Others, refer to production release spec
Step < 0.3 mm
Others, refer to production release spec
Scratch
A c c e p t c r i t e r i a
Doc. No.
DOC- 00036367
Issued Date
1/12/2007
Revised Date
11/19/2008
Page
62 of 88
A c c e p t c r i t e r i a
A c c e p t c r i t e r i a
SM-TP002-0706
REV.
A06
MI
Advertisement
Table of Contents
