Introduction - HTC Neon Service Manual

Table of Contents

Advertisement

Doc. Title

1. Introduction

This manual provides the technical information to support the service activities of this product.
This document contains highly confidential information, so any or all of this document should not be revealed to
any third party.
Chapter 1: Introduction-This Chapter is about Products features and basic Product function. After reading
this chapter, you will know what feature the product has and basic hardware operation. Also
you will know how to perform soft-rest and hard-rest in this chapter.
Chapter 2: Device Disassembling and Assembling Procedure- After reading this chapter, you will learn
how to disassemble and assemble the product. Also, you will know what tools to use and the
torque. Please follow the instruction to disassemble the unit to prevent from damaging the
unit.
Chapter 3: ROM Re-flash Procedure- After reading this chapter, you will learn how to perform the ROM
image re-flesh by using RUU and SD-Card. Also you can find the steps of enter the boot
loader mode.
Chapter 4: DIAGNOSTIC PROGRAM- After reading this chapter, you will learn
Chapter 5: Power measurement test- After reading this chapter, you will learn how to use MB leakage test
procedure and battery run-down test (Battery Capacity Measurement).
Chapter 6: Cosmetic Inspection Criteria- After reading this chapter you will learn the appearance quality
inspection criteria, ex. Display, bezel, and housing etc...
Chapter 7: Generic Troubleshooting- After reading this chapter, you will learn how to do generic
trouble-shooting.
Chapter 8: Generic Labeling Plan- In this chapter, you will find generic labels for reference, ex. Regulation
label, and battery label etc...
Chapter 9: Generic Spare Part List and Photos- In this chapter, you will find Spar parts reference list and
photos for repairing, including unit and Board level.
Chapter 10: RF Antenna Specification- Reference Spec for RF test.
HTC CONFIDENTIAL
HTC Corporation
.
Neon Service Manual
How to use the diagnostic program to perform unit function test
How to test some functions in Windows Mobile mode (ex. WLAN, Bluetooth, and USB
etc...)
Doc. No.
DOC- 00036367
Issued Date
1/12/2007
Revised Date
11/19/2008
Page
4 of 88
SM-TP002-0706
REV.
A06

Advertisement

Table of Contents
loading

Table of Contents