Recovering Back To Default Configuration - Planet WGSW-48040HP Quick Installation Manual

8. Recovering Back to Default Configuration
 IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address "192.168.0.100" or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can login the
management WEB interface within the same subnet of 192.168.0.xx.
14
46
48
47 45
Figure 8-1: WGSW-48040HP Reset Button
48
Fiber
FAN Alarm 2
48
FAN Alarm 1
47
SYS
46
RESET
PWR
45
47