Recovering Back To Default Configuration - Planet IGS-10020PT Quick Installation Manual

6. Recovering Back to Default Configuration
To reset the IP address to the default IP address "192.168.0.100" and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within
the same subnet of 192.168.0.xx and default password. Be noted that all the
previous setups will be disappeared after the factory default reset is made.
Reset Button
Reset Button
18
9
9
10
Reset
Figure 6-1: IGS-10020PT Reset Button
Console
115200,N,8,1
1G/2.5G
9
100/1G/2.5G SFP
Reset
Figure 6-2: IGS-10020HPT Reset Butto
10
1G/2.5G
100
IGS-10020PT
P1 P2
Ring R.O.
LNK
9 10
ACT
LNK/ACT 1G/2.5G LNK/ACT
10
10/100/1000T
LNK/ACT
LNK/ACT
Fault