Configuring Ip Address - Planet WGSW-48040HP Quick Installation Manual

48-port 10/100/1000mbps 802.3at poe managed switch with 4 shared sfp ports
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

5. Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 5-1.
Figure 5-1: IP Information Screen
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents