Using The Programmable Timer; Setting The Off Timer; Operating Instructions - Bionaire BCM658X3-CN Instruction Leaflet

O P E R AT I N G - I N S T R U C T I O N S

OPERATING INSTRUCTIONS

Your humidifier is equipped with a technologically advanced
Digital Humidistat. You can set the humidifier to run
continuously in manual mode or set the Digital Humidistat to
your desired humidity setting. The Digital Humidistat will
automatically turn the humidifier ON or OFF depending on
the preset comfort level. The comfort level ranges between
30% and 65% relative humidity.
MANUAL MODE INSTRUCTIONS
1. Plug the humidifier into a 120V AC electrical outlet.
2. The display will show the current room humidity. NOTE:
The display range is 21% - 90%. If your room humidity
level falls below 21%, the unit will display 21. If your
room humidity level rises above 90%, the unit will
display 90.
3. To start the unit, push the mode (
3 seconds for high manual setting.
4. Press the button again for medium manual setting and
again for low manual setting. The settings will be
displayed on the top of the display screen. To stop the
unit, scroll through the settings until only the room
humidity is displayed.
Figure 1
Reservoir Handle
Reservoir
Base
DIGITAL HUMIDISTAT INSTRUCTIONS
To take advantage of the Digital Humidistat, press the mode
(
Low and the Auto icon is displayed. Then adjust the humidity
level by pressing the up (
the desired humidity level is achieved. The display will
continue to show both the room and set humidity level. When
the room humidity level rises above the set humidity, the
humidifier will shut off. When the room humidity level drops
below the set humidity level, the humidifier will turn on
automatically.
NOTE: When setting the Digital Humidistat, there will be a 2
minute delay before the unit turns on. This allows for the
most accurate humidity reading.
NOTE: There is a delayed reaction in the motor designed to
prevent the motor from turning on and off frequently due to
changing humidity levels. There is a 2 minute delay after
) button once within
the unit reaches it's set humidity level before it will turn on
again. It may be longer if the humidity level remains above
the set humidity, but there will always be at least a 2 minute
delay when the humidity level reaches the desired setting.

USING THE PROGRAMMABLE TIMER

The Digital Humidistat allows the user to program the
FilterClean
®
humidifier to come on at a preset time, or turn off after a set
Indicator
amount of time.

Setting the Off Timer

Control Panel
1. Select the mode and or humidity you want the humidifier
2. While the humidifier is running, press the timer (
3. Press the up (
Humidifier
Housing
4. The screen will then return to showing the mode that was
5. After the preset time expires, the humidifier will
) button until the speed is set in either High, Medium or
) and down (
to run in.
button. The display will show "0".
) and down (
many hours you would like the humidifier to run before
automatically shutting off in increments of 1 hour.
selected and a timer icon to indicate the timer is set.
automatically shut off.
) buttons until
)
) buttons to select how