Starting Therapy; Stopping Therapy; Viewing The Sleep Report - ResMed Defy Mini User Manual

Starting therapy

1. Direct the patient to fit their mask.
2. Direct the patient to press Start/Stop, or if the SmartStart feature is enabled, direct them to
breathe into their mask.
Therapy will begin and the Sleep Report screen is displayed.
The screen will go black automatically after a short period of time. You can press Home or the dial to
turn it back on. If power is interrupted during therapy, the device will automatically restart therapy
when power is restored.
The AirCurve 10 device has a light sensor that adjusts the screen brightness based on the light in
the room.

Stopping therapy

1. Direct the patient to remove the mask.
2. Direct the patient to press Start/Stop, or if SmartStart is enabled, therapy will stop automatically
after a few seconds.
The Sleep Report now provides a summary of the therapy session.

Viewing the Sleep Report

The Sleep Report screen shows sleep quality and mask seal status for the most recent therapy
session. Turn the dial to scroll down to view more detailed usage data. The parameters displayed
will depend on the therapy mode.
14
The pressure bar shows the inspiratory and expiratory pressures in green.
The green bar will expand and contract as the patient breathes in and out.