Table of Contents
Advertisement
The settings can be changed in different ways depending on the type of screen:
Turn the dial to edit live in
the menu.
Setting the date and time
Before you set up a new patient and start therapy for the first time, make sure you set the correct
local date and time on the device. If you set the date and time after starting therapy, you may lose
patient data.
1. In Settings menu, select Date and change the setting to the correct date.
2. Select Time and change it to the correct local time.
3. Make sure the correct local time and date has been applied.
The AirCurve 10 settings must be configured for each individual patient. The settings should be
periodically reassessed to ensure optimal therapy.
Settings menu
You set all parameters relating to a patient's therapy and device configuration in the Settings menu.
Note: Not all parameters are available in all regions. The default and range values may differ
between modes and regions.
The range of parameters in the Settings menu are expressed in cm H
0.98 hPa. The units can be changed under Configuration.
Therapy
Parameter
Description
EPAP
Sets the pressure to be delivered to
the patient when the device is
cycled into expiration.
10
Turn the dial to change
the setting.
Mode
ASV
ASVAuto
Select from a list of options.
O, where 1cm H
2
Range
CPAP
4–15 cm H
O (4–15 hPa)
2
0.2 cm H
O (0.2 hPa) increments
2
O is equal to
2
Hide quick links:
Advertisement
Table of Contents
