Screen Display; Information Screen - Sony PXW-X500 Operation Manual

i AUDIO OUT connector (XLR type,
5-pin, male)
Outputs the audio signals recorded on audio
channels 1 and 2 or audio channels 3 and 4. The
audio signals are selected by the MONITOR
switch.
j REMOTE connector (8-pin)
Connect a remote control unit to control the
camcorder remotely.
Note
Before connecting/disconnecting the Remote Control
Unit to/from the camcorder, be sure to turn off the
camcorder POWER switch.
k SDI OUT 1/2 connectors (BNC type)
Outputs an HDSDI or SDSDI signal (with
embedded audio). The output from this connector
can be turned on or off using Operation >Input/
Output >SDI Out1 Output (or >SDI Out2 Output)
in the setup menu.

Screen Display

Information Screen

a Resolution
Indicates the resolution of the output video.
b Recording format
Indicates the current recording format or the
recording format of clip being currently played.
c Recording mode
d File format
e Status display
PB: Appears during play.
NDF: Appears when non-drop-frame timecode is
selected.
EXT-LK: Appears when the internal timecode
generator is locked to an external signal input
to the TC IN (timecode input) connector.
HOLD: Appears when the operation mode of the
internal timecode generator is set to R-RUN
and stopped.
f System frequency
Indicates the system frequency of video being
currently played or recorded.
22
dB