Screen Display - Sony PXW-X400KF Operating Instructions Manual

000 13
1. Overview

Screen Display

Information Screen
1 2 3 4 5
12 13
11
10
9
1.
File system indicator
2.
File format indicator
3.
Status display
PB: Appears during media playback.
NDF: Appears when non-drop-frame timecode is
selected.
EXT-LK: Appears when the internal timecode
generator is locked to an external signal input
to the TC IN (timecode input) connector.
HOLD: Appears when the operation mode of the
internal timecode generator is set to R-RUN
and stopped.
4.
System frequency indicator
Indicates the system frequency of video being
currently played or recorded.
5.
Audio format indicator
Indicates the audio recording format or the audio
format of clip being currently played.
Indicator Recording format
16bit HD420 HQ
DVCAM
MPEG IMX 50
8 7
Indicator Recording format
24bit HD422 50
MPEG IMX 50
XAVC Intra
XAVC Long
6.
Audio level meters
Indicates the audio recording or playback levels of
channels 1 to 4.
7.
Remaining battery capacity indicator
Displays the battery remaining capacity icon and
the remaining recording time.
8.
Remaining media capacity indicator
Shows bar segments indicating the remaining
capacity of recording media in the slots.
9.
Warning indicator area
Displays warnings when trouble with recording
occurs.
For details, see "Error/Warning System" (page 132).
10.
Clip name display
Displays the name of the clip currently recording
when recording, or displays the name of the next
clip to be recorded during recording standby.
11.
Time data display
Switches displays of duration, timecode, and
user bits data, depending on the position of the
DISPLAY switch.
Displays the type of data currently shown in the
time data display, as follows.
6
TCG: Recorded timecode
TCR: Playback timecode
UBG: Recorded user bits
UBR; Playback user bits
CNT: Counter
DUR: Duration
CLK: Time display (when the PRESET/REGEN/
CLOCK switch is set to CLOCK)
When the HOLD button is pressed to hold the
timecode value, the timecode is displayed in the
format shown below. When the HOLD button is
pressed again to release the hold, the timecode is
displayed in the normal format.
The three dots indicate that the timecode and
counter progress are displayed in hold mode.
12.
Resolution indicator
Indicates the resolution of the output video.
13.
Recording format indicator
Indicates the current recording format or the
recording format of clip being currently played.
Status Screens
The status screens allow you to check camcorder
settings and various types of status information.
When no menu is displayed, push the MENU
CANCEL/PRST/ESCAPE switch up to the CANCEL/
PRST position to display the status screen. Each
push selects the next status screen.
The following status screens can be displayed.
Camera Status screen
Displays settings and status information related to
shooting.
Display item Description
Gain Gain level in dB units
Shutter Electronic shutter status
Gamma Gamma category and curve
White White balance mode setting
Gain Switch GAIN switch status
Zebra Zebra pattern status
Iris Iris f-stop value
Focal Length Focal length
Focus Distance Focus distance
Depth Of Field Depth of field
Zoom Speed Zoom speed configured for the
lens ZOOM button
Audio Status screen
Displays settings and status information related to
audio input and output.