Sony PXW-X500 Operation Manual page 132

Maintenance
Item
WRR Setting
Makes settings related to the
wireless tuner.
Time Code
Makes settings related to
timecode.
Sub-item setting
WRR Valid CH Sel
All/CH1
WRR CH Select
TX1/TX2
WRR Delay Comp
On/Off
TX
---
TX Audio Peak
---/Peak
TX Input Level
---/Mic/Line
TX ATT Level
---
TX LCF Frequency
---
TX System Delay
Auto/0.0ms to 8.0ms
TC Out
Auto/Generator
DF/NDF
DF/NDF
LTC UBIT
Fix/Time
132
Description
Selects whether to enable channels 1 and 2 of the
wireless tuner (All) or channel 1 only (CH1).
Selects the reception channel for display in the
menu.
TX1: Displays channel 1.
TX2: Displays channel 2.
Selects whether to enable (On) or disable (Off)
the delay compensation function for wireless
input audio. (When On is selected, all E-E output
audio is delayed by about 8 ms.)
Displays the name of the transmitter whose
signals are being received on the channel
selected by WRR CH Select.
Displays whether the AF level of the transmitter
whose signals are being received on the channel
selected by WRR CH Select are over peak.
Displays whether the input level of the
transmitter whose signals are being received on
the channel selected by WRR CH Select is set to
microphone (Mic) or line (Line).
Sets the ATT level of the transmitter whose
signals are being received on the channel
selected by WRR CH Select. (The setting range
varies depending on the transmitter.)
Sets the low cut filter frequency of the
transmitter whose signals are being received on
the channel selected by WRR CH Select. (The
setting range varies depending on the
transmitter.)
Sets the amount of audio delay.
Auto: Automatically corrects for the amount of
delay so that the delay in the audio from the
wireless tuner is zero.
0.0ms to 8.0ms: Sets the amount of estimated
wireless system delay, for cases in which
several wireless systems are being used via a
device such as an audio mixer.
Selects the timecode output.
Auto: Outputs the timecode generator value
during recording, and the timecode reader
value during playback.
Generator: Outputs the timecode generator
value during recording and playback.
Selects drop-frame mode (DF) or non-drop-
frame mode (NDF).
Sets the data recorded in LTC user bits.
Fix: Records user-specified data.
Time: Records the current time.