Sony PXW-X500 Operation Manual page 130

Maintenance
Item
Audio
Makes settings related to
audio.
Sub-item setting
Min Alarm Volume
Off/Set
Speaker Attenuate
Off/3dB/6dB/9dB/12dB
Headphone Out
Mono/Stereo
Reference Level
–20dB/–18dB/–16dB/
–12dB/EBUL
Reference Out
0dB/+4dB/–3dB/EBUL
CH1&2 AGC Mode
Mono/Stereo
CH3&4 AGC Mode
Mono/Stereo
AGC Spec
–6dB/–9dB/–12dB/–15dB/
–17dB
Limiter Mode
Off/–6dB/–9dB/–12dB/
–15dB/–17dB
Output Limiter
On/Off
CH1 Wind Filter
On/Off
CH2 Wind Filter
On/Off
CH3 Wind Filter
On/Off
CH4 Wind Filter
On/Off
1kHz Tone on Color Bars
On/Off/Auto
130
Description
Selects the volume when the ALARM knob is
turned all the way down.
Off: Inaudible
Set: Audible
Selects the volume from the monitor speakers
(does not affect earphone volume).
Selects whether the earphones are monaural
(Mono) or stereo (Stereo).
Sets the output level of the 1 kHz test signal.
Sets the output level relative to the reference
input level.
Automatically adjusts the input level of analog
audio signals recorded on channels 1 and 2, and
selects whether to make the adjustments
separately for each channel (Mono) or in stereo
mode (Stereo).
Automatically adjusts the input level of analog
audio signals recorded on channels 3 and 4, and
selects whether to make the adjustments
separately for each channel (Mono) or in stereo
mode (Stereo).
Selects the AGC characteristic (saturation level).
Selects the limiter characteristic (saturation
level) for large input signals when adjusting the
audio input level manually. Select Off if not
using the limiter.
Turns the audio output limiter on/off.
Turns the channel 1 wind noise reduction filter
on/off.
Turns the channel 2 wind noise reduction filter
on/off.
Turns the channel 3 wind noise reduction filter
on/off.
Turns the channel 4 wind noise reduction filter
on/off.
Sets whether to output (On) or not output (Off) a
1 kHz test signal in color bar mode.
Auto: Outputs a test signal only when the
AUDIO SELECT CH1 switch is set to
AUTO.