Additional Functions; Buzzer - Miele dishwashers Operating Instructions Manual

Buzzer

A buzzer sounds at the end of the
programme or if there is a fault.
It will sound four times at intervals at the
end of a programme with a short pause
in between. The buzzer will continue to
sound for up to an hour if you do not
switch off or open the dishwasher.
In the event of a fault, the buzzer will
sound continuously. The buzzer will
continue to sound for up to two minutes
if you do not switch the dishwasher off,
open it or correct the fault.
The buzzer is activated as standard at
the factory.
You can deactivate the buzzer at the
end of a programme if you wish. The
buzzer will still sound if there is a fault,
even if it has been deactivated.
^ Open the door.
^ Switch the dishwasher off with the Off
button V.
^ Press the programme selector button
in and, whilst holding it in, switch
the dishwasher on using the On
button U .
Keep the programme selector button
pressed in for at least four seconds
until the lower right-hand indicator
light comes on.
If this does not happen, start the
procedure from the beginning again.
Additional options
^ Press the programme selector button
briefly four times.
The "Inlet/Drain" indicator light will flash
briefly four times at intervals.
The upper right-hand programme
indicator light shows whether the
buzzer at the end of the programme is
activated or deactivated.
– If the upper right-hand programme
indicator is flashing: The buzzer is
activated.
– If the upper right-hand programme
indicator is not lit up: The buzzer is
deactivated.
^ If you want to change the setting,
press the programme selector button
for at least one second until the
"Inlet/Drain" indicator light comes on.
^ Press the programme selector button
briefly.
The setting is now stored in memory.
^ Switch the dishwasher off with the Off
button V.
35