Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. This will save time and money.
Please note that a call-out fee will be applied for unnecessary service visits where
the problem could have been rectified as described in these Operating
instructions.
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations. The manufacturer cannot be held
liable for unauthorised work.
Technical problems
Problem
The dishwasher
does not start.
The dishwasher
stops during a
programme.
42
Possible cause
The door is not properly
closed.
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The appliance is not
switched on.
The fuse is defective or
has tripped.
Remedy
Push the door firmly shut.
Insert the plug and switch on
at the socket.
Reset or replace the fuse.
(Minimum fuse rating - see
data plate).
Press the On button U and
select a programme.
– Reset or replace the fuse
(Minimum fuse rating - see
data plate).
– If the same mains fuse trips
again, call Miele.