Switching On; Selecting A Programme; Starting The Programme; Standby - Miele dishwashers Operating Instructions Manual

Operation

Switching on

^ Turn on the tap if it is turned off.
^ Open the door.
^ Make sure the spray arms are not
obstructed.
^ Switch the dishwasher on using the U
button.
The On indicator U and the indicator for
the last used programme will light up.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
^ Select the programme required with
the Programme selector button.
The indicator light next to the selected
programme will come on.
You can now select additional
functions (see "Additional functions").
32

Starting the programme

^ Start the programme by closing the
door.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.

Standby

To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or at the end of the
programme. The indicator lights will go
out and only the U indicator will light up.
^ To switch the indicators on again,
press any button (apart from the Off
button V).
The dishwasher will not switch to
Standby mode whilst a programme
is running, if salt or rinse aid needs
to be refilled, or if there is a fault.