Checking The Programmed Water Hardness Level - Miele dishwashers Operating Instructions Manual

Before using for the first time
Checking the programmed water
hardness level
^ Switch the dishwasher off with the Off
button V.
^ Press the programme selector button
in and, whilst holding it in, switch
the dishwasher on using the On
button U .
Keep the programme selector button
pressed in for at least four seconds
until the lower right-hand programme
indicator comes on.
^ Press the programme selector button
twice briefly.
The upper right-hand programme
indicator will flash for the number of
times which corresponds to the water
hardness level which has been set (see
chart).
^ Switch the dishwasher off with the Off
button V.
16