Completing Assembly; Attaching The Stop Key; Removing The Protective Film - Precor TRM 425 Owner's Manual

Completing Assembly

Once initial assembly is complete, there are a few things to do before the treadmill
can be used:
 Attach the stop key
 Remove protective film
 Level the treadmill
 Check the alignment
 Adjust the running belt
 Break in the equipment
Completing Assembly

Attaching the Stop Key

The magnetic stop key fits into the nest on the stop switch assembly at the base
of the console.
Figure 19: Stop key placement
For more information on using the emergency stop function and the safety clip,
see the product Owner's Manual.

Removing the Protective Film

The treadmill ships with a protective film over the Precor logos and on the face of
the console. To remove the film, grasp the edge of it and peel it off the equipment.
13