Precor TRM 425 Owner's Manual page 29

Precision Series / Energy Series Treadmill Owner's Manual: TRM 425 / 223
3. When the first setting (SAFETY CODE) appears,
press a key to continue.
If you want to ...
Change this setting
Leave this setting as it is The right arrow key
4. Use the left and right arrow keys to change the
setting, then press GO to save your changes.
5. Repeat the previous two steps for the remaining
settings.
Note: You can use the left arrow key to return to
previous settings if you want to change them, and
the list of settings loops from the end back to the
beginning.
6. When you have changed all of the settings you
want to change, press PAUSE to exit from the
setup menu.
The following table shows the effect that each setting
has and the changes you can make.
Then press ...
GO
Table 4. Console settings
Setting Effect
SAFETY CODE Requires
anyone
who wants
to use the
equipment
to enter a
safety code
first (refer
to Entering
the Safety
Code)
SET UNIT OF Selects the
MEASURE system to
use when
entering or
reporting
distances
and
weights
24
Values Default
DISABLE or DISABLE
ENABLE
US US
STANDARD STANDARD
or METRIC