Armrests - Mercedes-Benz Sprinter Operator's Manual

Seats
68
Adjusting the head restraints
Release button
:
Height adjustment
;
Angle adjustment (luxury head restraints
=
only)
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release button : and slide
the head restraint down to the desired
position.
X
To adjust the angle: hold the head
restraint by the lower edge and tilt it to the
desired position.
Removing the head restraints
X
Pull the head restraint up to the stop.
X
Press release button : and pull out the
head restraint.
Installing the head restraints
! Install the head restraints with the front
side facing forwards (luxury head
restraints).
X
Insert the head restraint so that the rod
with the detents is on the left.
X
Push the head restraint down until it
engages.

Armrests

X
To set the armrest angle: fold the armrest
upwards ; to an angle of more than 45°.
The armrest is released.
X
Fold the armrest forwards = to the stop.
X
Slowly fold the armrest upwards to the
desired position.
X
To fold the armrest up: fold the armrest
upwards : to an angle of more than 90°.
Seat heating
G
Warning!
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.