Telephone - Mercedes-Benz Sprinter Operator's Manual

On-board computer with steering wheel buttons
86
Calling up the range
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the display shows the
message.
X
Press the & or * button repeatedly
Range
until the
The approximate distance which can be
covered with the tank's current contents
and your current style of driving is shown.
i If the fuel tank is almost empty, the
Please refuel
7
instead of the range.
Resetting the consumption statistics
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the display shows the
message.
X
Press & or * to select the function
you would like to reset.
X
Press and hold the 9 reset button until the
values are reset to "0".
i The consumption statistics
start
are automatically reset after 999
hours or 9,999 miles (kilometers).
The consumption statistics
are automatically reset after 9,999 hours
or 99,999 miles (kilometers).
Telephone menu
You can operate the mobile phone using the
functions in the
connected to the Sprinter hands-free system.
G
Warning
A driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
After start
message appears.
message is shown
After start
After
After Reset
TEL
menu, provided it is
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h ), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
Switching the mobile phone on
Using the steering wheel buttons
X
Switch on the mobile phone and the audio
system; see the separate operating
instructions.
X
Press the V or U button repeatedly
TEL
until the menu appears in the display.
The information in the display depends on
the status of the mobile phone:
Mobile phone off: the display shows the
R
TEL off
(Audio 20) message.
PIN not entered: the display shows the
R
TEL PIN
(Audio 20) message.
X
Enter the PIN code using the mobile phone
or audio system.
The mobile phone searches for a network.
The display remains blank during this time.
You will see the operational readiness
display as soon as the mobile phone has
found a network.
Once the operational readiness symbol is
shown, you can operate the mobile phone
using the steering wheel buttons.
i If the operational readiness symbol goes
out, your vehicle is outside the
transmission/reception range.
Accepting a call
You can accept a call at any time, provided
the mobile phone is ready to receive calls.
You will see the following message in the
display: