Mercedes-Benz Sprinter Operator's Manual page 81

Using the steering wheel buttons
X
Press the V or U button repeatedly
Settings
until the
display.
X
Press the 9 reset button for about three
seconds.
You will see a message in the display
prompting you to press the 9 reset button
again to confirm.
X
Press the 9 reset button again.
The functions of all submenus are reset to
the factory settings.
i If you do not press the 9 reset button a
second time to confirm, the settings are
Settings
retained. The
again after approximately five seconds.
For safety reasons, it is not possible to
reset all of the functions while the vehicle
is in motion. For example, the
mode
function in the
remains unchanged.
Resetting the functions of a submenu
You can reset the functions of an individual
submenu to the factory settings.
Using the steering wheel buttons
X
Press the V or U button repeatedly
Settings
until the
display.
X
Press & to switch to the submenu
selection.
X
Press W or X to select a submenu.
X
Press the 9 reset button for about three
seconds.
You will see a message in the display
prompting you to press the 9 reset button
again to confirm.
X
Press the 9 reset button again.
All functions of the submenu are reset to
the factory settings.
i
If you do not press the 9 reset button a
second time to confirm, the settings are
On-board computer with steering wheel buttons
menu appears in the
menu appears
Hdlmp
Lighting
submenu
menu appears in the
Settings
retained. The
again after approximately five seconds.
For safety reasons, it is not possible to
reset all of the functions while the vehicle
is in motion. For example, the
mode
function in the
remains unchanged.
Submenus in the Settings menu
Using the steering wheel buttons
X
Press the V or U button repeatedly
Settings
until the
display.
X
Press & to switch to the submenu
selection.
You will see the collection of submenus.
There are more submenus than can be
displayed at the same time.
X
Press W or X to select a submenu.
The submenu currently selected is
highlighted.
X
Press & to select the function within a
submenu.
X
Change the setting by pressing W or
X.
The changed setting is saved.
You can select the following submenus:
Instrument cluster (
R
Units and language settings
-
Status bar settings
-
Clock/Date ( Y page 82)
R
menu appears
Hdlmp
Lighting
submenu
menu appears in the
Y page 80)
Z
79