Installing The Starter Clutch; Installing The Generator - Yamaha YZF-R1S Service Manual

STARTER CLUTCH AND GENERATOR
5-41

INSTALLING THE STARTER CLUTCH

1. Install:
S generator rotor 1
S damper 2
S driven gear 3
NOTE:
S The hole side of the damper is installed to the
generator side.
S Lubricate the engine oil 4 .
2. Install:
S starter clutch drive gear 1
S collar 2
S washer 3
Refer to "CHECKING THE STARTER
CLUTCH".
3. Install:
S washer 1
S O-ring 2
New
S spacer 3
NOTE:
Lubricate the engine oil to O-ring.

INSTALLING THE GENERATOR

1. Install:
S idle gear shaft
S idle gear 1
S washer
S idle gear shaft bolt 2
10 Nm (1.0 mSkg, 7.2 ftSlb)
LOCTITE
2. Install:
S generator rotor and starter clutch assembly
1
ENG
