FRONT AND REAR BRAKES
REPLACING THE REAR BRAKE PADS
NOTE:
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove :
S screw plug 1
S brake pad pin 2
S brake caliper 3
S brake pad spring
2. Remove :
S brake pads 1
(along with the brake pad shims 2 )
3. Measure :
S brake pad wear limit a
Out of specification ! Replace the brake
pads as a set.
Brake pad wear limit
4. Install :
S brake pad shims
(onto the brake pads)
S brake pads
S brake pad spring
NOTE:
Always install new brake pads, brake pad
shims, and a brake pad spring as a set.
4-20
CHAS
1.0 mm (0.04 in)