Yamaha YZF-R1S Service Manual page 264

STARTER CLUTCH AND GENERATOR
5-42
3. Install:
S generator cover gasket
S generator cover 1
(M6 bolts)
12 Nm (1.2 mSkg, 8.7 ftSlb)
(M8 bolts)
22 Nm (2.2 mSkg, 16 ftSlb)
NOTE:
S First tighten the M8 bolts and then tighten the
M6 bolts.
S Tighten the generator rotor cover bolts in
stages and in a crisscross pattern.
4. Fill:
S engine oil
Refer to "CHANGING THE ENGINE OIL" in
chapter 3.
5. Install:
S bottom cowling
S left side cowling
Refer to "COWLINGS" in chapter 3.
6. Install:
S fuel tank
S rider seat
Refer to "SEATS" and "FUEL TANK" in chap-
ter 3.
ENG