Adjusting The Rear Brake Light Switch; Checking The Front And Rear Brake Pads - Yamaha YZF-R1S Service Manual

ADJUSTING THE REAR BRAKE LIGHT SWITCH/

CHECKING THE FRONT AND REAR BRAKE PADS

EAS00128
ADJUSTING THE REAR BRAKE LIGHT
SWITCH
NOTE:
The rear brake light switch is operated by move-
ment of the brake pedal.
The rear brake light switch is properly adjusted
when the brake light comes on just before the
braking effect starts.
1. Check:
S rear brake light operation timing
Incorrect ! Adjust.
2. Adjust:
S rear brake light operation timing
a. Hold the main body 1 of the rear brake light
switch so that it does not rotate and turn the
adjusting nut 2 in direction a or b until the
rear brake light comes on at the proper time.
Direction
a
Direction
b
EAS00122
CHECKING THE FRONT AND REAR BRAKE
PADS
The following procedure applies to all of the
brake pads.
1. Operate the brake.
3-45
CHK
ADJ
Brake light comes on
sooner.
Brake light comes on
later.