Konica Minolta bizhub c650 Service Manual page 263

1. Product specification
C. Type of paper
No punch mode
Punch mode
1
Z-folding mode
Folding mode
Paper curling
*1: Only for the Taiwan market
1
4
1
Same as the main body.
Paper size
• Combination with the folding/saddle stitching mode is not available.
Metric area 2holes:
A3, B4, A4, A4S, B5, B5S, A5, A5S,
8K *1, 16K *1, 16KS *1,
8 x 13, 8-
4holes:
A3, B4, A4, B5, 8K *1, 16K *1
Inch area 2holes:
11 x 17, 8-
5- 1 / x 8-
2
3holes:
11 x 17, 8-
Type of paper 64 to 90 g/m
• Special paper is not guaranteed. The punching of label
paper, tab paper, OHP paper, blueprint master and bind-
ing-holed paper are not allowed.
Paper size A3, B4, 11 x 7, 8K
• For B4 paper (including the mix of the paper), the com-
bination with the stapling mode is not available.
Type of paper 64 to 90 g/m
• Special paper is not supported. Label paper, tab paper,
transparency film, paper, holed paper, and low stiffness
paper are not supported in Z-folding mode.
Paper size 8- / x 14
1
2
Type of paper 64 to 90 g/m
• Special paper is not supported. Label paper, tab paper,
transparency film, paper, holed paper, and low stiffness
paper are not supported in folding mode.
a
a : Excluding the OHP paper : Amount of curl: 15 mm or less
OHP paper
Theory of operation Ver. 2.0 May 2008
1 / x 13, 8- 1 / x 13, 8- 1 /
2 4 8
1 / x 14, 8- 1 / x 11, 8- 1 /
2 2
1 / , 5- 1 / x 8- 1 / S, 7- 1 / x 10-
2 2 2 4
/ x 11
1
2
2 of the high-quality paper and the plain paper
2 of the high-quality paper and the plain paper
2 of the high-quality paper and the plain paper
5 sheets of paper immediately after the printing
A07TT1C006AA
: Amount of curl: 10 mm or less
x 13- 1 /
4
x 11S,
2
1 / , 7- 1 / x 10- 1 / S
2 4 2