Konica Minolta bizhub c650 Service Manual page 208

Theory of Operation Ver. 8.0 Jun. 2008
Motor name
Ozone ventilation fan
motor (FM6)
Color toner suction fan
motor (FM7)
K toner suction fan
motor (FM8)
Power supply cooling
fan motor (FM9)
IH cooling fan motor/1
(FM10)
Control
• Plug-in/sub-power switch OFF
Stop • In sleep
• When updating the firmware
• In standby, low power
• At paper-jam, in trouble, or when the door is open
Half speed
• All drive systems are OFF due to the cause except paper
jam, trouble, or door being open
• At warm-up, initial operation, image stabilization, function
Full speed
• At toner replenishing, after detecting charge leakage
*1
• When printing
• Plug-in/sub-power switch OFF
• At warm-up, low power, or initial operation
• At low power, or sleep
Stop
• At paper-jam, in trouble, or when the door is open.
• All drive systems are OFF due to the cause except paper
jam, trouble, or door being open.
Half speed -
• At image stabilization, toner replenishing, after detecting
Full speed charge leakage
• When printing
• Plug-in/sub-power switch OFF
• At warm-up, low power, or initial operation
• At low power, or sleep
Stop
• At paper-jam, in trouble, or when the door is open.
• All drive systems are OFF due to the cause except paper
jam, trouble, or door being open.
Half speed -
• At image stabilization, toner replenishing, after detecting
Full speed charge leakage
• When printing
Stop • When sleep
• Plug-in/sub-power switch OFF
• At stand by, low power
• When updating the firmware
Half speed
• At paper-jam, in trouble, or when the door is open.
• All drive systems are OFF due to the cause except paper
jam, trouble, or door being open.
• At warm-up, initial operation, image stabilization, function
Full speed • At toner replenishing, after detecting charge leakage
• When printing
• Plug-in/sub-power switch OFF
• In low-power or sleep
• When updating the firmware
Stop
• At paper-jam, in trouble, or when the front door is open
• All drive systems are OFF due to the cause except paper
jam, trouble, or door being open
Half speed • In standby
• At warm-up, initial operation, image stabilization
Full speed
• When printing
Control conditions (outline)
24. Other control
173