Restoring Factory Default Settings - Dell V505 User Manual

NOTE: The default country is United States.
4. Use the left and right Arrow button
5. When the country you want appears on the display, press the Select button
Entering Time and Date
1. From the operator panel, use the left and right Arrow buttons
Select button
2. Use the left and right Arrow buttons
3. Use the left and right Arrow buttons
4. Using the keypad, enter the month, day, and year.
5. Press the Select button
6. Using the keypad, enter the hour and minutes.
7. Press the Select button
8. Use the left and right Arrow buttons
9. Press the Select button
Restoring Language to Factory Default
You can restore the language on your display to factory default without using the printer menus.
NOTE: Using this key sequence will also restore all other selected settings to factory default.
1. Turn your printer off.
2. Press and hold the Back button
3. Continue pressing these buttons until Lang cleared appears on the display.
4. Use the left and right Arrow buttons
name. Press the Select button

Restoring Factory Default Settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often
referred to as the factory default settings.
1. Make sure the printer is on.
.
.
.
to save the setting.
and the Start button
to save each selection.
to scroll through the country list.
to scroll to Device Setup, and then press the Select button
to scroll to Date/Time, and then press the Select button
to scroll through the time format.
while pressing the Power button
to select your language, country, time, date, fax number, and fax
to save the setting.
to scroll to SETUP, and then press the
.
.
.