Using Windows Vista; Printing A Network Setup Page - Dell V505 User Manual

Hide thumbs Also See for V505:
Table of Contents

Advertisement

12. Press the Select button
13. Go to your router, and then press the push button on your router within two minutes. Wait for the configuration to
complete.
NOTE:
Some routers may require less time or more time to configure. Refer to your router's manual to see
the time required to push the router button before setup connection expires.
If setup is successful
Wi-Fi Protected Setup Successful appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see
If setup is unsuccessful or times out
Wait for a few minutes, and then perform
14. Follow the instructions on the installation screen to complete setup.

Using Windows Vista

To configure your printer on the wireless network using WPS, you may use Windows Vista™ instead of the Push-Button or
PIN methods. For more information about using Windows Vista, see the documentation that came with your operating
system.

Printing a Network Setup Page

To find your printer IP address and other wireless network settings like your SSID, BSS Type and wireless security mode,
print a network setup page.
1. From the main menu of the printer operator panel, press the left or right Arrow button
and then press the Select button
to continue.
step 8
to
step 13
.
Wi-Fi
LED. Continue with
again.
step
15.
to scroll to Setup,

Advertisement

Table of Contents
loading

Table of Contents