Tcp/Ip Menu - Dell V505 User Manual

Wireless Information

TCP/IP Menu

Network Time
Active Network
Reset Network Adapter
Defaults
Wireless Information Menu
From this menu:
Network Name
Wireless Signal Quality
TCP/IP Menu
From this You can:
menu:
Enable DHCP Enable DHCP on your printer.
*Yes
No
NOTE:
Set IP Address
Use the keypad to enter an IP address. Press the Select button
NOTE:
instead.
Set IP Netmask
Use the keypad to enter an IP Netmask. Press the Select button
Push Button
PIN
Automatic
NOTE: The Wi-Fi Protected Setup menu is accessible only when the active connection is
Wireless.
View your wireless setup options.
Network Name
Wireless Signal Quality
Configure TCP/IP setup options.
Enable DHCP
If DHCP is disabled, these items appear on the display:
Set IP Address
Set IP Netmask
Set IP Gateway
If DHCP is enabled, these items appear on the display:
View IP Address
View IP Netmask
View IP Gateway
Allow your printer to update its internal clock according to the time server of your
network.
*Enabled
Disabled
Specify which type of network to use.
*Auto
Ethernet 10/100
Wireless 802.11b/g
Clears or retains all wireless network settings.
No
Yes
You can:
View the current SSID being used.
NOTE: You cannot change the value of Network Name.
View the current wireless signal strength.
You cannot change or set an IP Address, IP Netmask, or IP Gateway if DHCP is enabled.
The IP address cannot be changed if DHCP is enabled. View IP Address appears on the display
to save your settings.
to save the settings.