Maytag MAH8700AW* Service page 39

Disassembly Procedures
!
23.Set the tub on the floor. Position 4" wood blocks or
equivalent around the spinner shaft. Roll the tub to
the upright position and rest it on the blocks.
.
24.Remove the 10mm screws around the perimeter of
the tub.
©2005 Maytag Services
WARNING
16026126 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
NOTE: Torque tub bolts to 6-11 ft. lbs.
25.Separate the front and rear halves of the Outer Tub.
26.Tub Gasket can be replaced after tub halves are split.
39