Superior TF18NE Installation And Operation Instructions Manual page 21

EMBER PLACEMENT
WARNING: Do not operate unit
without ember material correctly
in place as shown in Figures 40
& 41. Do NOT place ember mate-
rial anywhere else on the unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro-
duce carbon monoxide or soot. If
replacement embers are needed,
the replacement embers must be
purchased from IHP. See page 43
for part numbers.
WARNING: All previously ap-
plied loose material must be re-
moved prior to reapplication.
Figure 41 - Placement of Rock Wool (shown with Platinum Bright Embers)
126818-01A
INSTALLATION
Ember Material
Figure 40 - Platinum Bright Embers
Rock Wool
www.SuperiorFireplaces.US.com
Continued
1. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see Parts,
page 39.
Platinum Bright Ember placement. Add
embers to front, flat burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
flat burner just behind horizontal ports as
shown in Figure 40.
Rock Wool placement. Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 41.
2. Add lava rock and small decorative logs
around base of heater if desired. DO NOT
place rock or additional logs on front
burner or on logs. Placing any material
on unit other than ember material on front
burner may result in production of carbon
monoxide or soot.
Flat Front Burner
21