Superior TF18NE Installation And Operation Instructions Manual page 16

INSTALLING LOGS, EMBERS AND
LAVA ROCK
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
CAUTION: After installa-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With heater set to Hi, check to
see if flames contact any log. If
so, reposition logs according to
log installation instructions in
this manual. Flames contacting
logs will create soot.
TF Series Burner System - Log
Compatibility Chart
Burner System Fiber Log
Models
TF18NE
LTF18-MM
TF18PE
TF2430NE
LTF24-MM
LTF30-MM
TF2430PE
Figure 21 - TF Series Burner System-
Log Compatibility Chart
16
INSTALLATION
Concrete Log
Models Models
LTF18-RS
LTF24-RS
LTF30-RS
www.SuperiorFireplaces.US.com
Continued
LTF(18,24,30)-MM LOG PLACEMENT
It is very important to install the logs exactly as
instructed. Do not modify logs. Only use logs
supplied with heater or as identified for use
with the heater as shown in Figure 21, page
16. Each log includes reference numbers
formed in the bottom or back of the log. The
circled number indicates the order it is placed
on the burner system. The remaining numbers
indicate the size burner system the logs are
designed to fit. For example, the first log for
a 24 inch burner system will include a circled
1 and also a 24. The circled 1 indicates this
is the first log to be installed. The 24 indicates
this log belongs to a 24 inch log set. See page
46 for reference numbers detail.
1. Place the rear log (#1) on base assembly
as shown in Figure 22. Log will fit over
right end of burner and rest in middle of
U-burner.
Base
assembly
Figure 22 - Installing Log # 1
1
''U'' -
Burner
126818-01A