Superior TF18NE Installation And Operation Instructions Manual page 18

6
Rectangular
Peg
Figure 27 - Installing Log # 6
Figure 28 - Installing Log # 7
8. Place the front right mid log (#8) on top of
the front right log (#4) as shown in Figure
29. Match the round metal pin on the top of
the front right log (#4) with the round hole
on the bottom of the front right mid log (#8).
9. Place the top right log (#9) on top of the
right rear chunk log (#7) and front right mid
log (#8) as shown in Figure 30. Match the
round peg on the top of the right rear chunk
log (#7) with the round hole on the bottom
of the top right log (#9) and square peg on
the top of the front right mid log (#8) with
the square hole on the bottom of the top
right log (#9).
18
INSTALLATION
Continued
Metal Pin
7
Round
Peg
Square Peg
www.SuperiorFireplaces.US.com
Metal Pin
Figure 29 - Installing Log # 8
Square Peg
Figure 30 - Installing Log # 9
10. Place the right rear top log (#10) on top
of the right rear chunk log (#7) as shown in
Figure 31, page 19. Match the rectangular
peg on the top of the right rear chunk log
(#7) with the rectangular hole on the bottom
of the right rear top log (#10).
11. Place the left top log (#11) on top of the left
back top log (#5) and left top forked log (#6)
as shown in Figure 32, page 19. Match the
round peg on the top of the left top forked
log (#6) with the round hole on the bottom
of the top left log (#11) and rectangular peg
on the top of the left back top log (#5) with
the rectangular hole on the bottom of the
top left log (#11).
8
Round
9
Peg
126818-01A