Technical Data - Jonsered FR2318 FA4X4 Operator's Manual

Dimensions
Length without cutting unit, mm/ft
Width without cutting unit, mm/ft
Height, mm/ft
Machine without cutting unit, with empty tanks, kg/lb
Wheel base, mm/ft
Track width, front, mm/ft
Track width, rear, mm/ft
Tyre dimensions
Air pressure, rear - front, kPa / bar / PSI
Max. gradient
Engine
Brand / Model
Nominal engine output, kW (see note 1)
3
Displacement, cm /cu.in
Fuel, minimum octane grade lead-free
Tank volume, litres/USqt
Oil synthetic, class SJ-CF
Oil tank capacity, litre/USqt
Starting
Max.motor speed, r/min
Electrical system
Type
Battery
Main fuse
Spark plug
Electrode gap, mm/inch
Noise emissions and cutting width (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Cutting width, cm/inch
Sound level (see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Transmission
Brand
Oil, class SF-CC
Forward speed, km/h.
Reverse speed, km/h
Cutting unit
Type
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model
measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on
the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
equipped with different cutting decks, the noise emissions are stated in order starting from the cutting deck with the smallest cutting width.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation)
of 1.2 dB(A). If the machine can be equipped with different cutting decks, the noise pressure levels are stated in order starting from the cutting deck
with the smallest cutting width.
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s (seat).

TECHNICAL DATA

dB (A)
WA
2
2
FR 2318FA
2020/6,61
890/2,92
1150/3,77
231 / 509
887/2,9
712/2,34
627/2,06
16 x 7,5 x 8
60 (0,6/8,5)
10°
Briggs & stratton/31G7
9,7
502
85
10/10.6
SAE 5W/30 or SAE 10W/30
1,4/1,5
Electric starter
2900 ± 100
12 V, negative earthed
12 V, 24 Ah
Spade connector, 7.5 A
Champion QC12YC
0,75/0,030
98-97
99-98
103-112/41-44
84-84
2,5
0,7
Tuff Torq K46
SAE 10W/40
0-9
0-6
JC 103
JC 112
) in conformity with EC directive 2000/14/EC. If the machine can be
WA
FR 2318FA 4x4
2020/6,61
890/2,92
1150/3,77
243 / 536
887/2,9
712/2,34
627/2,06
16 x 7,5 x 8
60 (0,6/8,5)
10°
Briggs & stratton/31G7
9,7
502
85
10/10.6
SAE 5W/30 or SAE 10W/30
1,4/1,5
Electric starter
2900 ± 100
12 V, negative earthed
12 V, 24 Ah
Flat pin, 15 A.
Platinum plug
0,75/0,030
98-97
99-98
103-112/41-44
84-83
2,5
0,7
K 574 KTM 10L
SAE 10W/50 Synthetic
0-9
0-6
JC 103
JC 112
English
2
– 31