Technical Data - Jonsered LM 2146M Operator's Manual

• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Engine
Brand
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Oil tank capacity, litre
2
Engine oil
Weight
With empty tanks, kg
3
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
4
Sound levels
Sound pressure level at the operator's ear, dB (A)
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manufacturer's man-
ual and select the best viscosity based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
2000/14/EC.
4
Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB (A).
12

Technical data

1
dB (A)
WA
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Jonsered dealer or discard it at a recycling location.
LM 2146M
Briggs & Stratton
125
2900 +/- 100
1.8
QC12YC
0.5
1.0
0.5
SAE 30/SAE 10W-30
17
96
95
81
) in conformity with EC directive
WA
897 - 002 - 26.09.2018