Using The Configuration/Setup Utility Program - IBM 326 Type 8848 Installation Manual

Note: If you are installing a 32-bit Windows operating system on your server, you
1. Go to http://www.ibm.com/pc/support/.
2. In the Download section, click Downloads & drivers.
3. On the "Downloads and drivers" page, in the Brand field, select Servers.
4. In the Family field, select Eserver 326.
5. In the Operating system field, select your operating system.
6. Click Continue.
7. On the "ERserver 326 Support" page, in the View by document type field,
8. Select the instructions for your operating system.

Using the Configuration/Setup Utility program

The Configuration/Setup Utility program is part of the BIOS code. You can use it to:
v Change the startup drive sequence
v Configure serial-port assignments
v Enable USB keyboard and mouse support (default)
v Set advanced hardware features
v Set the date and time
v Set passwords
v Set power-management features
Complete the following steps to start the Configuration/Setup Utility program:
1. Turn on the server and watch the monitor screen.
2. When the message Press F1 for Configuration/Setup appears, press F1. If a
3. Follow the instructions on the screen.
34
326 Type 8848: Installation Guide
can install your operating system using the ServerGuide Setup and
Installation CD that comes with your server (see "Using the ServerGuide
Setup and Installation CD" on page 33.)
select OS installation.
supervisor (administrator) password has been set, you must type the supervisor
password to access the full Configuration/Setup Utility menu.