Coolant Level Adjustment
Warning
Do not remove the radiator pressure cap
when the engine is hot. When the engine
is hot, the coolant inside the radiator will be
hot and also under pressure. Contact with
this hot, pressurized coolant will cause
scalds and skin damage.
1
chgw_1
1. Expansion tank
2. Expansion tank cap
Allow the engine to cool.
The expansion tank cap can be removed
from the left hand side of the motorcycle.
Remove the cap from the expansion tank
and add coolant mixture through the filler
opening until the level reaches the MAX
mark. Install the cap.
Maintenance and Adjustment
Note:
•
If the coolant level is being
checked because the coolant has
overheated, also check the level in
the
necessary.
•
In an emergency, distilled water
can be added to the cooling
system.
must
replenished
Hybrid OAT coolant as soon as
possible.
2
If hard water is used in the cooling system,
it will cause scale accumulation in the
engine and radiator and considerably
reduce the efficiency of the cooling system.
Reduced cooling system efficiency may
cause the engine to overheat and suffer
severe damage.
Coolant Change
Have the coolant changed by an authorized
Triumph dealer in accordance with scheduled
maintenance requirements.
radiator
and
top
off
However,
the
coolant
then
be
drained
and
with
HD4X
Caution
if
99