Increasing Speed While In Cruise Control - Triumph Tiger Explorer Owner's Handbook Manual

The set speed can be resumed by pressing
and releasing the RES/+ end of the adjust
button provided the conditions described on
page 53 have been met.
1
chdc_1
1. Cruise control ON/OFF button
2. Cruise control adjust button, SET/-
3. Cruise control adjust button, RES/+
The set speed will remain in the cruise control
memory until the ignition switch has been
turned to the OFF position.
General Information
Increasing Speed while in Cruise
Control
To increase the speed, press and release the
RES/+ end of the adjust button. Each press of
the button will increase the speed by 1 mph
or 1 km/h. If the button is held, the speed will
continuously increase
increments. When the desired speed is
shown in the display, stop pressing the adjust
button.
3
2
1
cgjp_8_1
1. Display screen
While increasing the speed, the display
screen in the instruments will change to 'SEt',
and will show the new set speed and will
flash until the motorcycle has achieved the
speed.
After 4 seconds the display screen will
change to the previous display.
Note:
• If riding up a steep incline and
cruise control is unable to maintain
the set speed, the instruments will
change to 'SEt', show the set speed
and will flash until the motorcycle
has regained the speed.
in single digit
55